Cisa mechanical multipoint lock 3 latches with U-shaped front entry 35 series 48816-35
Simple and efficient, the Cisa 3 latches U-shaped front entry 35 mechanical lock allows you to lock your doors even without a key. Just pull over and the three bolts come out automatically, guaranteeing a high level of safety in every situation.
U-shaped trimming front 24 & times; 6 mm in galvanized steel h. 2300 mm
- superior trimming 350 mm
- lower trimming 150 mm
3 side bolts
3 latches 11 mm thick
SECURITY EVEN WITHOUT USING THE KEY
When the door is closed, the 3 latches come out automatically without using the key.
The combination of 3 latches and 3 bolts guarantees high security against burglary.
RECOVERY OF THERMAL DISTORTION OF THE DOOR
The rack mechanism that lightens the rotation of the key and the locking system with 3 latches allow to recover the distortions of the door due to sudden changes in temperature.
AREAS OF USE
Entrance doors
Secondary entry doors
ADVANTAGES
For the end user
3-point locking without using the key.
Energy saving and acoustic improvement.
For the installer
Reduction of maintenance times and costs.
Perfect door alignment.
For the designer or architect
Designed according to the provisions of the European Standard pr EN15685.
Operation with European profile cylinder that can be integrated into master key systems for access management.
OPERATION
From inside and outside: the 3 latches come out automatically when the door is closed without having to use the key and therefore the door is always closed in 3 points.
From the inside: the opening of the 3 latches is obtained with the key or simply by operating the handle. The closing and opening of the 3 bolts is done only with the key. Closing the bolts puts the handle in neutral and the latches cannot be retracted.
From the outside: the 3 latches can only be opened with the key. The closing and opening of the 3 bolts is done only with the key.
Benefit:
Ease of use of the 3 latches of the lock as it is not necessary to use the key to lock.
CERTIFICATIONS
Grade 3 Security according to the European standard pr EN15685. Grade 3 makes the lock suitable for EN1627 certified doors up to resistance class WK / RC2.
The lock can be CE certified by the German institutes (Rosenheim) because it is always closed in 3 points without having to close with the throws.
INTERCHANGEABILITY
Perfectly interchangeable with Multitop Pro central lock.
Non-interchangeable diverters (180 mm slot).
SILENT LATCHES
The 3 latches of the lock have a device (anti-friction) which makes closing silent and soft.
Benefit:
Noise reduction.
CLOSED BOX 15.5 MM THICKNESS
The lock and diverter boxes are closed and 15.5 mm thick.
Benefit:
Residues and dirt cannot enter.
No tampering is possible during the assembly phase.
Reduction of holes on the profile and guarantee of correct installation on thermal break profiles and Eurogroove profiles.
STRIKING PLATES
Transverse adjustment for correct installation of the door.
With nylon box for aesthetic protection of the bolt hole.
Kit composition:
1 striking plate for central lock
2 striking plates for additional locking points
Striking plate kit for the following profiles:
European reversible chamber
Type R (overlap) RH and LH
DX and SX port (NC65 STH port type)
RH and LH iron profiles